Who wants to mow their grass every week? Maintaining a lawn in a way that actually looks nice is hard work.

It requires regular attention, weeding, watering, raking and other tasks to keep the lawn looking the way it should. If you are tired of lawn care and want to put in an artificial lawn, you look forward to the day when you no longer have to take care of the lawn. That day could be sooner rather than later if you use this DIY Guide to Installing Artificial Lawn. An artificial lawn requires no regular maintenance and has many other benefits. Once you use the DIY Guide to Installing Artificial Lawn, you can leave the lawn alone and enjoy your spare time. Here are the steps you’ll need to take.

1. Prep the Area

You will want to remove the grass from the property and then dig up the first 3-4 inches (or 7.5-10 centimeters) of soil to make room for a new base. Remove any other plants or weeds that could make the surface uneven. If it rains before you work on the project, let the soil dry for a few days so it won’t slump under the new lawn. You don’t have to grade the surface to perfection, but try to stomp it down to get rid of loose soil. You will want a slight slope to improve the drainage to the area.

2. Plan Drainage

Artificial grass doesn’t drain the same way a regular lawn would. It is easiest to install the yard over well-draining soil. The grass should be permeable to water and the aggregate base soil gives another drainage layer. If you do not use that type of soil, you should consider installing a drainage system before you install the grass. If you do not get much rain in your region, you an simply leave drainage gaps around the perimeter of the property.

3. Place the Border

You will want to get a waterproof border to install around the perimeter of the yard if you do not already have one. This will keep the lawn from slumping and separating as the years go by. Plastic bender boards are the most commonly used materials. You could also do something more upscale like a concrete curb.

4. Add Weed Barriers

If you want to protect the lawn from weeds, you can also lay out a barrier at the bottom of the excavated area. This will protects the artificial lawn from growing weeds and it can also deter worms and gophers from digging through the grass.

5. Use Base Material

Choose crushed rock, gravel or other items and fill the excavated area with that material. If you are using the DIY Guide to Installing Artificial Lawn over concrete, you may want to put a rubber shock pad down as well. Once the base material is out, grade and level it as necessary. You will then wet it down to let it settle.

6. Roll out the Lawn

Once the base material dries, roll the artificial lawn out on top. You will want to let it sit unrolled either in place or elsewhere for a few days because it will be coiled from sitting in a roll for a few days. Once it is flat, make the appropriate cuts so it will fit properly. You can use a carpet stretchers to hold it firmly in place. You can use seaming tape or stakes to fasten the artificial lawn into place.

It may take time and effort to put in an artificial lawn sourced from Amazon Artificial Grass, but it saves time later in maintenance.

Article By Lauren Williamson